Setup Menu - GE 13GP243 Manual

Operating Features
SETUP Menu
Press MENU until SETUP is highlighted. Then press + to select the
SETUP menu. Press MENU to move down the menu and + and- to
adjust each function.
Press
MENU
to select
SETUP
1st
SETUP
Menu
Screen
By setting the Sleep function, you program your TV to turn itself off after a
certain period of time. This is useful whenever you want to watch TV for an
hour or so before going to sleep. Press the + or- button to select the length
of time you want the "IVto stay on. Details are on page 10.
You can program your TV to turn itself on at a specific time by setting the
ALARM time function and turning the ALARM: ON/OFF function ON. "
Details are on page I I.
The ALARM: ON/OFF function lets you turn the alarm on or off by pressing
+ or- button. Detm'ls are on page ] 1.
After Setting the CLOCK function, the time is displayed on the "IVscreen
whenever you change channels or press DISPLAY. Press and hold - to Set
the correct hours and + to set the correct minutes. Details are on page 3.
Press
MENU
until the
second
SETUP
Menu
appears
When you press + or - to start the AUTOPROGRAM function, the TV cycles
through all channels and places only the active channels for your area in its
channel memory. The channel memory is the list of channels the TV stops on
when you press CHAN up or down. Details are on page 12.
The EDIT CHANNELS function allows you to edit the channel memory by
adding or erasing channels. Details are on page 12.
The ANTENNA: CABLE/AIR function tells your TV whether you have cable
or a home antenna connected to it. The TV adjusts this function for you
when you start the AUTOPROGRAM function. If you wish to adjust it
manually, press + or- to switch between the CABLE and AIR Setting.
9