Store Tv Channels - Philips 42PF9996 Owner's Manual

Autoprogram
Install (3' ? Antenna
Install mode _ Automatic
Cable
Install 0_0 Start
0
0
0
Select Autoprogram in the Install menu.
Press the cursor down to select Install mode.
Press the cursor right.
Note: It is recommended to keep the predeflned Automatic 'way
of autoprogrammin_. In case of difficulties in autopro_ramming
with the automatic method choose for Antenna or Cable whether
antenna or cable sJ_nds am present.
When Automatic is selected, the TV will automatically
detect whether or not cable signal input is present.
When Antenna is selected, the iV will detect antenna
signals and will search for all antennaTV channels available
in your local area.
When Cable is selected, theTV will detect cable signals and
will search for all cable TV channels available in your local
area,
0
Press the cursor down to select Install.
Note:All channels must be unbcked in order to autopm_ram. If
requested enter your PIN code to unlock all channels. (See
Channels in the TV menu, p. 15.)
0 Press the cursor right.
0
The message Searching appears and the progress of
autoprogramming is displayed.
When Autoprogramming is complete, the puck navigates to
Stop.A message appears confirming the completion together
with the total number of channels found.
Note: when you navigate to Stop before autoprogr_rnming is
complete, you are given the option to continue.
Available channels:
-with cable: max, from 1 to 125
- off air: max. from 2 to 69
Note: In case a particular channel is too weak for the
autopmgramming to identi_ after installation is complete, you
should tune to that channel by using the digit buttons on the
remote control
If the channel is not acquired a message will appear that the
channel is not available.