Control Paneland Features - Maytag MHW3000BG0 Use & Care Manual

CONTROL PANELAND FEATURES
Not aJl features and cycles are available on aJl models.
NOTE: The control panel features a sensitive surface that responds
to a light touch of your finger. To ensure your selections are
registered, touch the control panel with your finger tip, not your
fingernail. When selecting a setting or option, simply touch its name.
Model M HW4000
Model M HW3000
O POWER/CANCEL
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load,
See "Cycle Guide" for detailed descriptions of cycles,
O
START
Touch and hold until the light above START comes on to start
a cycle, or touch once while a cycle is in process to pause it.
If you want to add a garment, you can touch START when the
"Add a Garment" LED is on.
O
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and the
Estimated Cycle Time will be displayed (for times longer than 99
minutes, hours will be displayed, followed by minutes). Factors
such as load size, wash temperature, and water pressure may
affect the time shown in the display during the cycle. Tightly
packing garments, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
Touch the desired option along the right of the display to adjust
settings. See "Cycle Guide" for available settings on each cycle.
Not all settings are available with all cycles.
4
O
Temperature
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, follow the garment label instructions. All wash
temperatures feature a cold rinse.
Soil Level
The Soil Level setting (wash time) is preset for each wash
cycle. For most loads, use this preset soil level. When
you change the soil setting, the cycle time will increase or
decrease in the Estimated Cycle Time display.
For heavily soiled and sturdy fabrics, use the Soil Level
setting to select more wash time. For lightly soiled and
delicate fabrics, use the Soil Level setting to select less
wash time. Lower soil level settings will help reduce
tangling and wrinkling.
Spin Speed
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
, Higher spin speeds mean shorter dry times, but may
increase wrinkling in your load.
, Lower spin speeds reduce wrinkling, but will leave
your load more damp.
DELAY START
Use + and - to delay the start of the wash cycle by up
to 9 hours. To turn off Delay Start, use + and - to set the
delay time to "0_' or touch POWER/CANCEL