Step 6: Setting The Sonowave Speal<Ers - Philips HTS6500 User Manual

Getting Started (continued)
Step 6: SeXing the
SonoWave speakers
There are three parameters to adjust the
SonoWave speakers: Room Acoustics,
Speaker Distance and Listening Position.
You can adjust the SonoWave speaker
settings according to your room
environment and setup for optimum
performance.
Press and hold SOUND on the
remote control to enter SonoWave
speaker settings mode.
Use _ _ keys to select { ROOM
ACOUSTICS } and press OK.
@ To return to the main SonoWave
speaker settings selection, press A or Y
key.
Use _ _ keys to select the condition of
the room and press OK to confirm.
.... ÷ { HARD } for concrete/glass walls.
.... ÷ { SOFT } for wooden walls,
Use _1 _ keys to select { SPEAKER
DISTANCE } and press OK,
FRONT L
!4
SPEAKER DISTANCE
FRONT R
1
Use 4 I_" keys to select { LISTENING
POSITION } and press OK.
FRONT L FRONT R
@
@
LISTENING
POSITION
Use _l J_ keys to select the distance
between the listening position and the
SonoWave speakers and press OK to
confirm,
.... ÷ { NEAR } for distance less than 1,5
meters (4' 7",)
.... ÷ { DEFAULT } for distance between 1.5
meters (4' 7") to 2.5 meters (7' 7".)
.... ÷ { FAR } for distance more than 2.5
meters (7' 7".)
The SonoWave speaker settings are now
completed and the system will exit the
setting automatically.
Use @ _ keys to select the distance
between the two SonoWave speakers
and press OK to confirm.
.... ® { NEAR } for distance less than I
meter (3' S".)
.... ® { DEFAULT } for distance between I
meter (3' S") to 2.5 meters (7' 7".)
.... ÷ { FAR } for distance more than 2.5
meters (7' 7".)
25