G Erring Started; Step I: Turning On The Dvd System; Turning Offco Eco Power Standby Mode; Step 2: Finding The Correct Viewing Channel - Philips HTS6500 User Manual

Getting Started
Step I: Turning on the DVD
system
Step 2: Finding the correct
viewing channel
@ Press the SOURCE button on the front
panel repeatedly to select :
DISC _ NP3 DIRECT _ FN _ AN _
TV _ AUX _ DI _ DISC ....
_ 8Yo[+ ) oJIK_
Or
Press DISC/USB, TUNER, TV,
AUX/DI or HP3 DIRECT on the
remote control
.... _ If the USB is detected, pressing the
DISC/USB will toggle between DISC
and USB mode.
.... ÷ Press TUNER to toggle between FM
and AM band.
.... ÷ Press AUX/DI to toggle between
analog audio input and digital audio input.
-) Press PIP3 DIRECT to playback the
audio tracks from your portable audio/
HDD player which is connected to this
DVD system.
@
@
Before you start ...
Make sure you have completed all the
necessary connections before proceeding.
Press SOURCE button until "DISC"
appears on the display panel.
Turn on the TV and set it to the correct
video-in channel. You should see the
blue DVD background screen on the TV.
.... _ You may go to Channel I on your TV,
then press the Channel Down button on
your TV's remote control until you see
the Video In channel.
.... _ You may press _ button repeatedly
on your TV's remote control.
.... _ Usually this channel is between the
lowest and highest channels and may be
called FRONT, AJV IN, VIDEO. See your
TV manual for more details.
.... ÷ If you are using a RF modulator, set
the TV to channel 3 or 4.
f
!'_"_-'_'-_i
_--_--_--_-
@ Press STANDBY ON (O).
.... ÷ The display screen will turn off.