Table of Contents
Advertisement
Back to Contents Page
Replacing Memory Module(s)
Dell™ XPS™ 730/730X Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Locate the memory modules on the system board (see
4. Press out the securing clip at each end of the memory module connector.
1
securing clip
2
memory module connector
5. Grasp the module and pull it upwards.
If the module is difficult to remove, gently ease the module back and forth to remove it from the connector.
CAUTION:
Do not install ECC memory modules.
6. Ensure that you install a single memory module in DIMM connector 0, the connector closest to the processor, before you install modules in any other
connector.
Dell™ XPS™ 730:
A matched pair of modules in
DIMM connectors 0 and 1
Dell XPS 730X:
Begin.
Replacing the Computer
Cover).
System Board
B matched pair of memory modules in
DIMM connectors 2 and 3
Components).
Advertisement
Table of Contents
