Using Convect Full Meal - KitchenAid KESC307 Use And Care Manual

_J_sing and Caring for Your Oven
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.
9. After cooking, unplug probe.
The probe symbol will remain lit until
you unplug the Temperature Probe.
10. Remove food from oven.
(This prevents overcooking.)
1 1. Clean probe.
Wash with a soapy sponge and dry
thoroughly. Use a plastic scouring pad
to remove cooked-on foods. You can
also clean the probe in a dishwasher.
Using Convect Full Meal
Convect Full Meal lets you choose from
among 10 preset oven convection cooking
cycles, all using the convection fan. These
cycles store commonly used cooking times,
cooking temperatures, and probe tempera-
ture settings.
Convect Full Meal saves you time by limiting
the number of pads you have to press when
cooking at a favorite setting, Convect Full
Meal also lets you set your own favorite
cycle (either convection or nonconvection).
1. Place food in cold oven.
If you need the Temperature Probe for your
cycle (settings 5-8 in the "Convect full meal
chart" later in this section), insert probe into
food. (Follow Steps 1-4 in "Using the
temperature probe" earlier in this section.)
2. Press CONVECT FULL MEAL.
PRESS YOU SEE
("C" stands for "cycle,"
"F" stands for "favorite")
continued on next page
39