Addition Of Additional Host Fc Port - NEC NF2300-SR412E User Manual

6.4

Addition of Additional Host FC Port

The disk array unit enables the number of host units connectable to the disk array unit to
be increased by adding the additional host FC port.
Product name: Additional host FC port
NF2300-SP03E is composed of two host FC port cards. Install a single host FC port card
on each of two controllers.
<Addition procedure>
The procedure of addition of the additional host FC port is the same as that of the
additional control card. See Section 6.3 "Addition of Additional Control Card". However,
no cache memory is installed in the additional host FC port.
Save the product in an area where high temperature do not occur and the
difference between the high and low temperatures is not large. Do not
save the product in a place with high humidity and/or much dust.
Save the product into the package during storage or shipment.
Note that foreign substances such as water and metal may not be entered
into the product during storage. Failure to follow it may cause device
failure, electric shock, and/or fire to occur.
Do not make terminals on connectors short circuited. Do not pour water or
liquid on terminals. Failure to follow it may cause device fault or electric
shock to occur.
Note that your fingers may not be caught or hit on some object when your
hands are entered into the disk array unit.
Do not disassemble or modify the additional host FC port. Failure to follow
it may cause the unit to be defected.
When inserting the additional FC card into the array controller, push it as
far as it will go and then secure it with the screws.
Incorrect insertion may cause malfunction.
CAUTION
Part number: NF2300-SP03E
73