Hose Assembly; Cord Assembly - Kenmore 721.33078 Owner's Manual

HOSE ASSEMBLY
After the handle has been assembled to. the
body and power cord has been wrapped
a'ound the cord hangers_ inser_ the upper end
of the hose i_o the opening on the body and
place the hose over the hose hoBer.
Hose
Holder
l-- Hose
_ r.Lower _
'_ _|Hose
'J Coupling
And then a_ach the lower hose holder Fovided
in the aceessory bag to the body and clip hose
into the holder and slide: hose onto the hose
coupling on floor nozzle and twist hose°
Make: sure hose is firmty connected before
_sing the vacuum.
CORD ASSEMBLY
Make sure the quick release cord hange_ is in
the upright pos_ion.
Lock the cord into
Locking
place by forcing _ Notch
into the _ocking
notch on the body
of the upper cord
hanger as shown.
This helps keep the
power coli out of
Cord
the path of the floor
r)ozzie.
Cord
Wrap the
power cord
around the
quick release
cord hanger
and Iower cord
hanger, and
clip the pt_g
onto the power
cord,
OPERATING INSTRUCTIONS
1, Turn the quick
release cord hanger
to either side and
down to release: the
power cord.
2, Unc_ip the power cord plug from the power
cord and pult the cord off the quick release cord
hanger. Check to be sure the power cord is sill}
locked into the locking notch. See CORD
ASSEMBLY.
3, Check to see if the cleaner has bag
installed, See: DUST BAG CHANGING,
4, Plug the polarized pow,_r cord., into a t20
Vo_ elec_'ical out_et.
NOTE: To reduce the risk of electric shock, flis
vacuum cleaner has a polarized plug, one blade is
wider than the o_:hel.This ptug will fit in a_ polarized
out,e1 onty one wa_y./f lhe plug does not: f_tfully in
the outleL [everse the plug, If it still:does no¢ fit,
conlact a qualified elect!'ician to [l_sta]l t he proper
outlet, 9o not change the p_ug in any way.
WARNING
Personal injury and Prodect Damage
Hazard!
DO NOT pteg. in if s_ftch is in ON pesi_iot_,
Personal inlury o_ producl damage could
reSUft,
, DO NOT use outle_s,above touters, Damage
to items ia surto_#d_ng area co£td occur.