Kenmore Elite 81714 - Pet-Friendly Lightweight HEPA Canister Vacuum Manual
  1. Manuals
  2. Brands
  3. Kenmore Manuals
  4. Vacuum Cleaner
  5. Elite 81714
  6. User manual

Kenmore Elite 81714 - Pet-Friendly Lightweight HEPA Canister Vacuum Manual

Advertisement

Table of Contents
Contents
Kenmore Elite 81714 - Pet-Friendly Lightweight HEPA Canister Vacuum Manual

BEFORE USING YOUR NEW VACUUM CLEANER

Please read this guide. It will help you assemble and operate your new Kenmore vacuum cleaner in the safest and most effective way. For more information about vacuum cleaner care and operation, call the Vacuum Cleaner Help Line at 1-877-531-7321. You will need the complete model and serial numbers when requesting information. Your vacuum cleaner's model and serial numbers are located on the Model and Serial Number Plate. Use the space below to record the model number and serial number of your new Kenmore vacuum cleaner.
Model No.
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.

PACKING LIST
Your KENMORE ELITE VACUUM CLEANER is packaged with the following parts and components assembled separately in the carton:

  • Canister Vacuum Cleaner (with Floor Brush & Dusting Brush)
  • PowerMate®
  • Pet PowerMate™
  • Hose & Handle Assembly (with Crevice Tool)
  • Telescoping Wand
  • Use & Care Guide

PARTS AND FEATURES

It is important to know your vacuum cleaner's parts and features to ensure its proper and safe use. Review these before using your vacuum cleaner.
PARTS AND FEATURES

REPLACEMENT PARTS

Part Part No.
Belt 20-53013*
Bulb 20-5248
Dust Bag (2-pack) 20-53291*
Dust Bag (6-pack) 20-53292*
Exhaust Filter 20-53296*
Motor Safety Filter 20-81002*
PowerMate® Agitator Assembly KC84REAVZ000
To order a replacement part call 1-844-553-6667 or visit www.searspartsdirect.com
* Available online at www.sears.com

NOTE: Detailed illustrations and listings of all vacuum cleaner parts are also available at searspartsdirect.com


Scan to reorder bags or go to kenmore.com/reorderCQ

CANISTER
PARTS AND FEATURES - CANISTER

ATTACHMENTS
PARTS AND FEATURES - ATTACHMENTS
NOTE: Crevice Tool attachment is stored on hose handle.

HOSE
PARTS AND FEATURES - HOSE

TELESCOPING WAND
PARTS AND FEATURES - TELESCOPING WAND

POWERMATE®
PARTS AND FEATURES - POWERMATE

warningPlease pay special attention to these hazard alert boxes, and follow any instructions given.

statements alert you to such dangers as electric shock, burns and personal injury.

statements alert you to such dangers as personal injury and/or property damage.

ASSEMBLY INSTRUCTIONS

Before assembling vacuum cleaner, check the PACKING LIST. Use this list to verify that you have received and identified all the components of your new Kenmore vacuum cleaner.


Electrical Shock Hazard
DO NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury.

PET POWERMATE
This canister is equipped with an on-board storage area for a Pet PowerMate ™ attachment.

  1. Press the release button to open the tool storage cover.

  2. Insert the Pet PowerMate™, press down into place, and close the tool storage cover securely.

POWERMATE
Align wand and insert onto PowerMate ® until the wand locks into place.

HANDLE ASSEMBLY
Insert wand into handle until lock button snaps in place.
To remove: Press wand release button and pull up on handle.
To store: Disconnect hose from wand and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed.

CANISTER

  1. Open the canister hood.
  2. Check to see that the dust bag is properly installed. See DUST BAG CHANGING for instructions.
  3. Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CLEANING for instructions.

HOOD AND TOOL STORAGE COVER
It is normal for the canister hood and tool storage cover to come when opened further than needed.

TO REINSTALL HOOD:

  1. Lift hood bracket up as shown.
  2. Align tabs located on the hood with slots located on the hood bracket. Press hood into hood bracket until it snaps in place.
    HOOD AND TOOL STORAGE COVER - Step 1
  3. Press hood slightly towards the rear of the canister.
  4. Lower hood to close. Press until hood latch snaps into place.

TO REINSTALL TOOL STORAGE COVER:

  1. Press tool storage cover bracket down.
    HOOD AND TOOL STORAGE COVER - Step 2
  2. Align front edges of tool storage cover on canister hood.
  3. Press rear of tool storage cover down until it snaps into place.
    HOOD AND TOOL STORAGE COVER - Step 3

HOSE
To install: Line up the hose latch tab with the notch in the canister hood, and insert hose into canister until it snaps into place.


The vacuum cleaner will not operate until hose is fully connected.
To remove: Do not open hood before removing hose. With hood closed, press the hose latch tab in to release and remove hose.

OPERATING INSTRUCTIONS


Moving parts! To reduce the risk of personal injury, DO NOT touch the agitator when vacuum cleaner is on. Contacting the agitator while it is rotating can cut, bruise or cause other injuries. Always turn and unplug from electrical outlet before servicing. Use caution when operating near children.

HOW TO START

Personal Injury and Product Damage Hazard

  • ALWAYS turn off the vacuum cleaner before unplugging.
  • The cord moves rapidly when rewinding. Keep children away and provide a clear path when rewinding the cord to prevent personal injury.
  • DO NOT use outlets above counters. Damage from cord to items in surrounding area could occur.
  • When any abnormality/failure occurs, stop using the product immediately and disconnect the power plug.

NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will in a polarized outlet only one way. If the plug does not fully in the outlet, reverse the plug. If it still does not fit, contact a electrician to install the proper outlet. Do not change the plug in any way.

  1. Pull cord out of canister to desired length. The cord will not rewind until the cord rewind button is pushed.
  2. Plug the polarized power cord into a 120 Volt outlet located near the floor.
    To rewind: Turn off and unplug the vacuum cleaner. Hold the plug while rewinding to prevent damage or injury from the moving cord. Push cord rewind button.


    Personal Injury and Product Damage Hazard

    • DO NOT run over power cord with PowerMate®. Personal injury or product damage could result.

    • DO NOT pull plug from wall by the power cord. If there is damage to the cord or plug, personal injury or property damage could result.

  3. Lower the wand from upright position by pressing on the HANDLE RELEASE pedal.
    HOW TO START - Step 1
  4. Select a pile height setting by pressing the ADJUSTMENT pedal on the rear of the PowerMate®. The pile height setting shows on the indicator.
    HOW TO START - Step 2
  1. Select a position on the handle 3-way On/Off switch.


    Slide the switch forward to the CARPET position to turn on suction from the canister motor and the PowerMate ® agitator. The CARPET indicator button will turn green, and the PowerMate agitator will start to spin.


    Slide the switch forward to the HARDFLOOR position to turn on canister motor suction only. The HARDFLOOR indicator button will turn green, and the PowerMate agitator will not spin.


    Slide the switch all the way back to turn the vacuum cleaner off. The CARPET and HARDFLOOR indicators will both become gray.

SUGGESTED PILE HEIGHT SETTINGS
warningAttention: Refer to your carpet manufacturers cleaning recommendations. Some more delicate carpets may require that they be vacuumed with the PowerMate agitator turned off to prevent carpet damage.
For best deep down cleaning, use the XLO setting. However, you may need to raise the height to make some jobs easier, such as scatter rugs and some deep pile carpets, and to prevent the vacuum cleaner from shutting off.
Suggested settings are:
HI – Shag, deep pile, super-soft, or ultra plush carpets, and scatter rugs.
MED – Medium to deep pile.
LO – Low to medium pile.
XLO – The preferred setting for many carpets and also for bare floors.

DO NOT leave the PowerMate ® running in one spot for any length of time. Damage to carpet may occur.

Product Damage Hazard Use care if the PowerMate ® and wand is left in the upright position as it may tip over easily. Property damage can occur if tipped.

VACUUMING TIPS
FOR BEST CLEANING RESULTS

  • Slide suction control forward to increase suction for upholstery and carpets.
  • Slide suction control back to decrease suction for lightweight rugs or drapes.
  • Keep the airflow passage open. Check each assembly area in REMOVING CLOGS occasionally for clogs.


Turn off and unplug vacuum cleaner from outlet before checking for clogs.

STAIRS

Personal Injury Hazard Use care if canister is placed on stairs. It may fall, causing personal injury or property damage.

Product Damage Hazard
Do not pull on the hose to move the canister from one stair to the next. When finished cleaning in one area use the handle grip on the canister to move the vacuum cleaner to a new location for further cleaning.

The stair grip located on lower body of the canister will aid in preventing the canister from slipping when used on stairs.

NOTE: Be sure the stair grip has engaged a step and that the canister is balanced securely on stairs before starting to vacuum.

SUGGESTED SWEEPING PATTERN
For best cleaning action, the PowerMate® should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direction of the PowerMate® should be changed to point into the next section to be cleaned. This pattern should be continued across the carpet with slow, gliding motions.
NOTE: Fast, jerky strokes do not provide complete cleaning.

EDGE CLEANER
Active brush edge cleaners are on both sides of the PowerMate®. Guide either side of the PowerMate® along base-boards or next to furniture to help remove dirt trapped at carpet edges.

POWERMATE® STORAGE
The lower wand has a U-shaped storage hook at its base that slides into the U-shaped slot on the canister. The storage hook allows the wands and PowerMate® to be stored with the canister to conserve storage space. The canister must be stored on end for this feature to be used.
The PowerMate® for storage attachment. Use the handle release pedal to place it in this position. The wand will slip out of the slot as it is lifted up for use and will slide into the slot as it is lowered for storage.
POWERMATE® STORAGE

ATTACHMENTS

DO NOT attach or remove handle or wands while vacuum cleaner is ON. This could cause sparking and damage the electrical contacts or electronic controls.

ATTACHMENTS ON HANDLE
NOTE: If the PowerMate ® is attached, turn vacuum cleaner off before removing handle from wand.

  1. Press wand release button and pull up on handle.

  2. Slide attachments firmly on handle as needed. See ATTACHMENT USE TABLE.
    ATTACHMENTS ON HANDLE

NOTE: To remove Pet PowerMate ™, dusting brush, and/or floor brush, press the wand release button and slide attachment out.

ATTACHMENTS ON WAND

  1. To remove wand from PowerMate ®, lock wand in straight-up position.
    ATTACHMENTS ON WAND - Step 1
  2. Press wand release pedal with foot and pull the wand straight up and out of PowerMate ®.
    ATTACHMENTS ON WAND - Step 2
  1. Put attachments on wand as needed. All except crevice tool will click into place. See ATTACHMENT USE TABLE.
    ATTACHMENTS ON WAND - Step 3

NOTE:
To remove Pet PowerMate™, Dusting Brush, and/or Fan Tool, press the tool release button and slide attachment out.

WAND (TELESCOPING)
The wand length is adjustable and requires no assembly. To adjust, simply push on the wand length adjust button and slide the upper wand to the desired height.

WAND LIGHT
This vacuum cleaner is equipped with a light on the extension wand. The light can be used to illuminate dimly lit locations. The wand light will operate only when the vacuum cleaner is in CARPET setting. The light will operate when attached or not attached to the PowerMate®.

CREVICE TOOL
Remove the crevice tool by pulling from flat end.
Insert the base of the crevice tool directly into the handle or bottom of wand for vacuuming in narrow spaces.

To attach the crevice tool to the handle:

  1. Place the round end of the crevice tool onto the tab on the handle as shown.

  2. Align the slot on the flat end of crevice tool with the tab on the handle.
  3. Press the crevice tool onto the handle until the crevice tool snaps into place.

ATTACHMENT USE TABLE

CLEANING AREA
ATTACHMENT Furniture 1 Between Cushions 1 Drapes 1 Stairs Bare Floors Carpeted Floors/Rugs Walls
Dusting Brush
Crevice Tool
Floor Brush
PowerMate ® 2
Pet PowerMate ™ 3
  1. Always clean attachments before using on fabrics.
  2. 3-way On/Off switch should be in HARDFLOOR position.
  3. PetPowerMate™ attachment instructions are included with the product.

PERFORMANCE/SAFETY FEATURES


Personal Injury Hazard
Always turn off and unplug the vacuum cleaner before cleaning the agitator area as agitator may suddenly restart. Failure to do so can result in personal injury.

OVERLOAD PROTECTOR
The PowerMate® has built-in protection against motor and belt damage should the agitator jam. If the agitator slows down or stops, the overload protector shuts off the PowerMate®. The canister motor will continue to run.
OVERLOAD PROTECTOR
To correct problem: Turn off and unplug vacuum cleaner, remove obstruction, then press OVERLOAD PROTECTOR RESET button.
If the PowerMate motor still does not run after reset, have the unit serviced by a Sears or other qualified service dealer.

ELECTRONIC SUCTION CONTROL
The electronic suction control allows you to change the power of the vacuum cleaner suction motor.

Increase suction for upholsteries and carpets.
Decrease suction for draperies and lightweight rugs.

CHECK BAG INDICATOR
When the vacuum cleaner is running with normal ow, the light on the CHECK BAG indicator is off. The light comes on whenever the ow becomes blocked. If that occurs, check the disposable dust bag, motor safety and other possible clog locations shown in REMOVING CLOGS.
CHECK BAG INDICATOR
To correct problem: See "Check Bag Indicator activates" in TROUBLESHOOTING.
NOTE: The light may come on when using certain attachments, due to reduced ow through attachment.

THERMAL PROTECTOR
This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating. If a clog prevents the normal ow of air to the motor, the thermal protector automatically. This allows the motor to cool in order to prevent possible damage to the vacuum cleaner.
To correct problem: Turn off and unplug vacuum cleaner to allow the vacuum cleaner to cool and the thermal protector to reset. Check for and remove clogs, if necessary. Also check and replace any clogged filters. Wait approximately (50) minutes and plug the vacuum cleaner in and turn back on to see if the motor protector has reset.
If the canister motor does not resume operation after the reset procedure described above, have the unit serviced by a Sears or other qualified service dealer.

CANISTER CARE

REMOVING CLOGS
The vacuum cleaner creates suction that picks up dirt. Rapidly moving air carries the dirt to the dust bag through the airflow passages. The dust bag lets the air pass through, while it traps the dirt. For best cleaning results, keep the airflow passage open. Check the starred areas occasionally for clogs. Turn off and unplug vacuum cleaner from outlet before checking.
REMOVING CLOGS

TO CHECK FOR CLOGS:

  • Check dust bag and change if full. See DUST BAG CHANGING.
  • Check motor safety and exhaust filter and replace if dirty. See MOTOR SAFETY FILTER CLEANING and EXHAUST FILTER CHANGING.
  • Check PowerMate® for any dirt or debris in the belt path area or in the agitator area. Carefully remove any string or debris located on the agitator or end caps. See TO CLEAN AGITATOR.

If the vacuum cleaner still has poor suction, do the following:

  1. Connect the hose to the canister and turn vacuum cleaner on. Check the end of the hose for suction. If there is good suction on the hose handle, there is no clog in the hose. If the suction is bad, remove any dirt or debris in the hose and handle.
  2. Connect hose handle to wand. Check the end of the wand for suction. If there is good suction at the end of the wand, there is no clog in the wand. If the suction is bad, remove any dirt or debris in the wand.
  3. Check PowerMate® swivel. Remove any dirt or debris.

CLEANING EXTERIOR AND ATTACHMENTS

  1. Turn and unplug vacuum cleaner. DO NOT drip water on vacuum cleaner.
  2. To clean exterior, or to reduce static electricity and dust build-up, wipe outer surface with a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry. Wipe dry after cleaning.


Do not use attachments if they are wet. Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed. They could leave marks.

DUST BAG CHANGING
For best cleaning results, the dust bag should be changed often. The CHECK BAG indicator will come on when the bag needs to be changed or the airflow is blocked.
NOTE: See REPLACEMENT PARTS for part number detail.

  1. Turn off and unplug vacuum cleaner.
  2. Remove hose from canister.
  3. Pull hood release out and up, then lift canister hood.
    DUST BAG CHANGING - Step 1
  1. Pull bag out of the bag mount.
    Note:
    The bag mount will flip forward after removing bag. This will prevent the hood from closing until a new bag is installed.
    DUST BAG CHANGING - Step 2
  2. Check the motor safety filter and replace, if necessary. See MOTOR SAFETY FILTER CLEANING.
    DO NOT bend or crease the middle of the cardboard when installing the bag into the bag mount slots.
    DUST BAG CHANGING - Step 3
  1. Rotate bag mount down and install bag into slots per illustration, pushing down until the cardboard tab locks into position and the holes align.
  2. Tuck the bag securely into the bag cavity so that none of the bag will be pinched by the hood.
  3. Close and latch canister hood.
  4. Insert hose into canister until it snaps in place.
  5. Plug cord into wall outlet.


NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full, which may damage the vacuum cleaner motor. Change bag more often when vacuuming these materials.

MOTOR SAFETY FILTER CLEANING

Electrical Shock Hazard
Turn off and unplug vacuum cleaner from electrical outlet. Do not operate the vacuum cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.

MOTOR SAFETY FILTER
Check motor safety filter occasionally and clean when dirty.
NOTE: See REPLACEMENT PARTS for part number detail.

  1. Remove the bag as outlined in the DUST BAG CHANGING section.
  2. Lift the rubber retainer and pull out motor own.
    MOTOR SAFETY FILTER
  3. Wash filter in warm soapy water, rinse, then dry. Do not clean in dishwasher or install while damp.
  4. Replace the filter by sliding it back into place under the ribs in the bag cavity. Tuck rubber retainer.
  5. Replace the bag as outlined in the DUST BAG CHANGING section.

EXHAUST FILTER CHANGING

Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter installed. Do not operate without filter cover installed.

EXHAUST FILTER - HEPA MEDIA
The exhaust filter cartridge must be replaced when dirty. Replace the filter when the entire surface area is covered evenly. The filter CANNOT be washed as it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTS for part number detail.

  1. Press latch to release the exhaust oOWHU cover from slot in canister.
  2. Pull filter cover down and outward to remove it from filter chamberin the canister.
    EXHAUST FILTER - HEPA MEDIA - Step 1
  1. Remove the exhaust filter cartridge.
    EXHAUST FILTER - HEPA MEDIA - Step 2
  1. Insert the new exhaust filter cartridge into the canister with the rubber seal towards the canister.
    EXHAUST FILTER - HEPA MEDIA - Step 3
  1. To replace the exhaust filter cover place the two tabs on the filter cover into the canister.
    EXHAUST FILTER - HEPA MEDIA - Step 4
  1. While holding latch down rotate filter cover into place.

  1. Release latch and verify that filter cover is locked into place.
    EXHAUST FILTER - HEPA MEDIA - Step 5

POWERMATE® CARE

Always follow all safety precautions when performing maintenance to the PowerMate®.


Electrical Shock Or Personal Injury Hazard
Always turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.

BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT

  1. Turn PowerMate ® upside down and remove six (6) screws.
    BELT CHANGING AND AGITATOR CLEANING - Step 1
  1. Turn PowerMate ® right side up. Press handle release pedal and lower the swivel. Loosen the rear latches located below the pedals. (A flat-head screwdriver may be required.)
    BELT CHANGING AND AGITATOR CLEANING - Step 2
  1. Grasp cover by rear and pull up to remove it from base.

  2. Lift off agitator cover

  1. Lift agitator assembly out and remove worn belt.

  1. Check and clean end cap areas. See AGITATOR ASSEMBLY for picture of complete agitator assembly.

TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacuum cleaner, the agitator must be cleaned every time the belt is changed. The agitator must also be cleaned according to the following schedule:

Vacuum Cleaner Use Clean Agitator
HEAVY - (used daily) every week
MODERATE - (used 2-3 times/week) every month
LIGHT - (used 1 time/week) every 2 months


Turn off and unplug cavuum cleaner from electrical outlet. Check and remove hair, string and lint build-up frequently in the PowerMate ® agitator and end cap areas. Remove any dirt or debris in the belt path area or in the brush roller area. Carefully remove any string or debris located on the agitator or end caps.

AGITATOR ASSEMBLY
AGITATOR ASSEMBLY

TO REPLACE BELT

  1. Install new belt over motor shaft, then over belt path.
    NOTE: See PARTS AND FEATURES for Belt number.
    TO REPLACE BELT
  1. Place agitator assembly back into PowerMate ®.

  1. Reinstall agitator cover. Make sure there is no gap between the agitator cover and base.

  1. Line up front of cover and base. Rest cover on front edge of base as shown.

  1. Rotate cover back. Press cover firmly until side and rear latches snap into place.
    NOTE: Make sure there is no gap between the cover and base.
  2. Turn PowerMate ® upside down and replace six (6) cover screws.

AGITATOR SERVICING

Electrical Shock Or Personal Injury Hazard
Always turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.

TO CHECK THE BRUSHES
TO CHECK THE BRUSHES
When brushes are worn to the level of the base support bars, replace the agitator assembly.

TO REPLACE AGITATOR ASSEMBLY

  1. Remove the floor brush from the PowerMate ®.
  2. Remove PowerMate ® cover, agitator cover, belt and agitator assembly. See "To Remove Belt" in BELT CHANGING AND AGITATOR CLEANING.
  3. Install new agitator assembly.
  4. Reinstall belt, agitator cover and PowerMate ® cover. See "To replace belt" in BELT CHANGING AND AGITATOR CLEANING.
    NOTE: See REPLACEMENT PARTS for part number and purchase details.

TROUBLESHOOTING

Review this table to find do-it-yourself solutions for minor performance problems. Any other service needed should be performed by a Sears or other service agent.

Always turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury.

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

Vacuum cleaner won't start
  1. Unplugged at wall outlet.
  2. Tripped circuit breaker/ blown fuse at household service panel.
  3. Loose hose electrical connections.
  1. Plug in firmly, press ON/OFF switch.
  2. Reset circuit breaker or replace fuse.
  3. Reconnect hose ends.

Poor job of dirt pick-up
  1. Full or clogged dust bag.
  2. Clogged airflow passages.
  3. Dirty filters.
  4. Wrong pile height setting.
  5. Wrong power level selected.
  6. Hole in hose.
  7. Worn PowerMate ® agitator.
  8. Worn or broken belt.
  9. Dirty agitator or end caps.
  10. Canister hood open.
  11. Tripped overload protector in PowerMate ®.
  1. Change bag.
  2. Clear airflow passages.
  3. Clean/change filters.
  4. Adjust setting.
  5. Adjust control.
  6. Replace hose.
  7. Change agitator.
  8. See BELT CHANGING AND AGITATOR CLEANING.
  9. See Step 8.
  10. Close and latch hood.
  11. Remove any items that may be caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps, then reset.

Vacuum cleaner starts but shuts off
  1. Hose or hood electrical connections.
  2. Tripped overload protector in PowerMate ®.
  3. Tripped thermal protector in canister.
  1. Check connections, reconnect hose ends.
  2. Remove any items that may be caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps, then reset.
  3. See PERFORMANCE/SAFETY FEATURES – "Thermal Protector".

PowerMate® will not run when attached
  1. PowerMate ® connections unplugged.
  2. Worn or broken belt.
  3. Dirty agitator or end caps.
  4. Tripped overload protector in PowerMate ®.
  5. Vacuum cleaner in HARDFLOOR mode.
  1. Plug in firmly.
  2. See BELT CHANGING AND AGITATOR CLEANING. Remove any items that may be caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps, then reset.
  3. See Step 2.
  4. See Step 2.
  5. Press CARPET button to activate PowerMate ®.

CHECK BAG Indicator activates
  1. Full or clogged dust bag.
  2. Dirty filters.
  3. Blocked airflow passage.
  4. Certain attachment tools.
  1. Change bag.
  2. Clean/change filters.
  3. Clear blockage from airflow passage.
  4. This is normal. Light should go off when tool is removed.
Vacuum cleaner picks up moveable rugs -or- PowerMate ® pushes too hard.
  1. Wrong pile height setting.
  2. Suction too strong.
  1. Adjust setting.
  2. Select lower Power Level.

Cord won't rewind
  1. Dirty power cord.
  2. Cord jammed.
  1. Clean the power cord.
  2. Pull out cord and rewind.

Vacuum cleaner leaves marks on carpet
  1. Wrong vacuuming pattern.
  1. See VACUUMING TIPS.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions in this guide before assembling or using your vacuum cleaner.


Your safety is important to us. To reduce the risk of electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety precautions including the following:

  • Use your vacuum cleaner only as described in this guide. Use only with Sears recommended attachments.
  • Disconnect electrical supply before servicing or cleaning out the brush area. Failure to do so could result in brush unexpectedly starting causing personal injury from moving parts.
  • Do not leave vacuum cleaner when plugged in. Unplug from outlet when not in use and before performing maintenance.
  • To reduce the risk of electrical shock - Do not use outdoors or on wet surfaces.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Do not use with a damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped in water, take it to a qualified serivce dealer for inspection and possible repair.
  • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
  • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
  • Do not handle plug or vacuum cleaner with wet hands.
  • Do not put any objects into openings.
  • Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air pow.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Turn off all controls before unplugging.
  • Use extra care when cleaning on stairs.
  • Do not put on chairs, tables, etc. Keep on floor.
  • Do not use vacuum cleaner to pick up flammable or cumbustible liquids, gasoline, cleaning fluid, perfumes, etc.), or use in areas where they may be present. The fumes from these substances can create a fire hazard or explosion.
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Do not use vacuum cleaner without dust bag and/of filters in place.
  • Always empty the dust bag after vacuuming carpet cleaners or freshener, powders, and fine dust. These products clog the dust bag, reduce airflow and can cause the bag to burst. Failure to empty the dust bag could cause permanent damage to the vacuum cleaner.
  • Do not use the vacuum cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc. They may damage the vacuum cleaner.
  • Do not operate the vacuum cleaner without the exhaust filter or filter door in place.
  • The hose contains electrical wires. Do not use when damaged, cut, or punctured. Replace if cut or worn. Do not pick up sharp objects.
  • Always turn off and unplug vacuum cleaner before connecting or disconnecting either hose, wand, Pet PowerMate ™, or PowerMate ®
  • Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
  • You are responsible for making sure that your vacuum cleaner is not used by anyone unable to operate it properly.


This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm.

SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your vacuum cleaner is intended for Household use. Read this Use & Care Guide carefully for important use and safety information. This guide contains safety statements under warning and caution symbols.

Vacuum Cleaner Help Line:
1-877-531-7321
8:00am-5:00pm EST, M-F
Sears Brands Management Corporation
www.kenmore.com
www.sears.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Kenmore Elite 81714 - Pet-Friendly Lightweight HEPA Canister Vacuum Manual

Advertisement

Need Assistance?

Do you have a question about the Elite 81714 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Related Manuals for Kenmore Elite 81714

Save Article as PDF

Table of Contents