Table of Contents
Advertisement
32. "IV BUTTON
First press this button when operating your
TV with this remote control, and then press
the button which corresponds to the func-
tion you want.
33.
NUMBER
BUTTONS
"O" THROUGH
"9"
Select any channel {whether or not it is in
the "Tuner Scan List") by pressing two but*
tons. (Press "O" and then "8" for channel 8.)
The number buttons are also used for setting
the clock and programming the timer.
34. CHANNEL
SELECT SUTTONS
Same as the buttons on the VCR.
35. SLOW SPEED BUTTONS
During slow playback the slow speed can be
adjusted by pressing the
SLOW
SPEED
button.
36. VCR CONTROL
SUTTONS
These buttons (except for "REC"
buttons)
, function same as the buttons on your VCR.
Note:
The REC buttons must be pressed
simultaneously to start recording,
37. TAPE SPEED SELECT BUTTON
Recording time using Cassette tape T-160:
EP: 8 hours
SP: 2.6 hours
Notes:
*
Playback
speed
automatically
cor-
responds with recorded speed.
•
This VCR cannot record in LP mode, but
can play LP recorded tapes.
38. TRACKING
CONTROL
SUTFONS
To minimize noise in playback.
3g. FRAME
ADVANCE
Bu'n'ON
Press to view tape one frame at s time.
Operates only after PAUSE button has been
pressed.
40. PAUSE BUTTON
Press to pause during recording or playback.
41. SLOW BUI-I"ON
Allows you to view a picture at slow speed.
42. GO-TO/INDEX
BUTTON
Press this button to search for the scene you
want to view using the counter GO-TO or
INDEX feature.
43. TV CONTROL
BUTTONS
Used for controlling the TV.
E8
4.
5,
7.
0,
100lENT
BUTTON
Used to select "IV or CATV channels.
Press "100", "2",
"3" in this order to select
channel 123. Press "100", "0" and "5'" for
channel 105.
DISPLAy
BUTTON
1st Press .... Calls up the mode display on
TV screen,
2nd Press {before
display disappeears)
.... The display on "IV screen disappears ex-
cept for "Linear Time Counter",
Also changes the VCR's display from the
clock to the counter,
3rd Press .... The counter memory "M" ap-
pears on "IV screen and in VCR's display,
4th
Press ....
Clears the display on "IV
screen,
Also changes the VCR's display
from the counter to the clock.
CLEAR BUTTON
Used for programming the timer.
And also used for counter reset button.
EJECT BUTTON
When this button is pressed in modes other
than recording, the tape stops, and the cas-
sette is ejected.
INTELASCAN
GUIDE
BUTTON
Press this button to use the Intelascan fea-
ture. (See page 2 for details.)
VCR/TV
SELECT BuTrON
Selects the signal to be viewed.
The VCR indicator comes on when the unit
is in VCR mode and the signal received by
the VCR is displayed on the TV screen.
With the switch in the "IV position {indicator
light off) the broadcast signal is received
directly by your TV set.
When the VCR
power is turned off, the VCR automatically
switches to "TV".
POWER BUTTON
Press to turn VCR on,
Press again to turn
VCR off,
51. VCR1 BUTTON
First press this button when operating the
VCR with this remote control and then press
the button which corresponds to the func-
tion you want,
52, VCR 2 BUTTON
Press this button when using another Hitachi
VCR
and operating
the
remote control
provided to control the two VCRs.
Advertisement
Table of Contents
