Table of Contents
Advertisement
•
PLAY SOUND
SELECTION
•
SAP ON/OFF
SELECTION
Press "6'" "_
to change
You can switch the sound output from the
AUDIO OUT jack during playback.
•
Hi-Fi: Hi-Fi sound is played back with s
Hi-Fi tape. The linear sound is played
.back with a non-Hi-Fi tape. Normally,
select "Hi-Fi".
•
LINEAR: The linear sound is played even
when Hi-Fi sound is recorded on
the tape.
•
STEREO/MONa
SELECTION
Press "7"
"_
to change
Your VCR is capable of recording stereo sound
from "IV stations transmitting stereo in your
area. All you have to do is to make sure the
STEREO indicator is displayed in the VCR dis-
play as the VCR can receive stereo broadcasts.
Normally this function can be left in the STEREO
mode. Your VCR wilt then automatically record
either stereo or monaural sound -- whatever is
broadcast.
In some fringe viewing areas, however, the
stereo signal may not be strong enough for qual-
ity reception. The signal may drift or become
noisy.
Should
that
occur,
change
the
STEREO/MONa
function
to the MONa mode
to receive clearer, cleaner sound,
Press "8"
"_
to change
Some TV stations broadcast another sound
channel along with selected stereo programs
called the SAP (Second Audio Program). The
SAP audio is sometimes used to broadcast the
second sound track of a bilingual movie.
If desired, you can record the SAP audio on the
linear sound track by changing the SAP menu
display to ON. For normal recording, leave the
SAP display set to OFF.
•
When OFF appears in the menu display, the
SAP function is turned off, and the VCR will
not record the SAP.
• When ON appears, the SAP function is
turned on and the VCR will record SAP audio
when it is broadcast.
•
Because SAP is transmitted together with a
stereo
signal,
the
STEREO
function
(described above) must also be set to the
STEREO mode before your VCR can record
the SAP.
•
To hear SAP, the "PLAY SOUND SELEC-
TION"
(described above) must be set to
"LINEAR".
E23
Advertisement
Table of Contents
