Download Print this page

Haier ESD210 User Manual page 2

Built-in dishwasher
Hide thumbs Also See for ESD210:

Advertisement

Available languages

Available languages

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii !ii! i! i! i! i! i! i! i! i! i! i!
Warning
- To reduce the risk of fire, electric shock,
or injury
to persons
when
using
your appliance,
follow
basic
precautions,
including
the following:
]
Read all instructions
before
using the appliance.
.
.
4.
.
6.
7
8
Use this appliance only for itsintended purpose as described in this use and
care guide.
Use only automatic dishwashing detergent and rinse agent recommended for
use in this appliance and keep them out of the reach of children because they
are corrosive and can be harmful.
This appliance must be properly installed in accordance with the installation
instructionsbefore it is used.
Never unplug your appliance by pulling on the power cord. Always grasp the
plug firmly and pull straight out from the outlet.
Replace immediately worn power cords, loose plugs/power
outlets.
Unplug your appliance before cleaning or before making any repairs.
Do not open the dishwasherdoor immediately after completionof wash process
or during the operation as hot air/steam may causepersonal injury.Pressthe
door latch,wait few secondsby allowing cold air to go in and then open the
door.
9.
Do not operate your appliance in the presence of explosive fumes.
10. Do not add or mix any flammable or explosive substances to the wash.
11. Appliance loading door must be closed during the operation of the machine.
12. Do not operate your appliance when parts are missing or broken.
13. Do not use this appliance for commercial dishwashing purpose.
14. Do not operate this appliance unless all enclosure panels are properly in place.
15. Do not tamper with controls.
16. To reduce risk of injury do not allow children to play in or on the appliance.
Close supervision of children is necessary when the appliance is used
near children.
17.
18.
This appliance mustbe connectedto proper electricaloutlet with the correct
electricalsupply.
Proper grounding must be ensured to reduce the risk of shock and fire. DO
NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a
three-prong electric receptacle outlet in the wall, have a certified electrician
install the proper receptacle. The wall receptacle MUST be properly grounded.

Advertisement

loading

This manual is also suitable for:

Esd211Esd212