Haier ESD210 User Manual page 10

POWER
Understanding the Dishwasher Control Panel:
Power Button:
* Press"POWER"button "In" to turn the power "ON".
* Press thisbutton again to turn the power "OFF".
Note: You will seethe "Power On Indicator Light" lit when the unit ison.
SELECT
Select Button:
* Press "SELECT" button to select your desired option: Sanitize
Wash, Heated Dry or Upper Wash. Selected option(s) indicator
light(s) will be blinking at the start of the wash program.
Delay Button:
* Press"DELAY"button if you want to delay the startingtime for a
wash program. Youcan delay the starting time for a wash
program from 1-9 hours.
DELAY
Time Delay Display (LCD):
* Thetimer display which is located next to the delay button showsthe numberof
hoursthe starting time for a wash program is delayed. Once the delay timer is
set,the settime will start blinking in the LCD.
Door Latch:
* Tolock the door, push the door with light
force until you hear the "Click."
)_:
]2
m ) _ )))
* Tounlock the door, squeezethe door latch
and pull towards you.
Note: DO NOT open the dishwasherdoor right away becausethe moist hot air
still may be presentinside the tub and cause harm.
Wash Program Buttons: i 0 0 0 0 l
* Thereare four wash programs that you can Po'rsa NORMALLIGHT RINSE&
PANS WASII WASH HOLD
selectfrom: Pots& Pans,Normal Wash, Light
Wash, and Rinse& Hold. Simply presswash program button based on the load
and soil type. Theselectedwash program indicator light will be blinking at the
start of the wash program.
9