Surface Units - GE JBS03 Owner's Manual And Installation Instructions

ge_com
Oven Vent
On glass cooktop models, the oven is vented
through an opening at the rear of the
cooktop.
On coil cooktop models, the oven is vented
through an opening under the right rear
surface unit.
Never cover the opening with aluminum foil
or any other material
Pointed Surfaces tonsomemodels)
Painted surfaces include the sides of the
range and the sides of the door trim.
To clean the painted surfaces, use a hot,
damp cloth with a mild detergent suitable for
these surfaces. Use a clean, hot, damp cloth
to remove soap. Drg with a drg, clean cloth.
Do not use steel-wood pads, commercial
oven cleaners,cleaning powders or other
abrasive cleaners.They will damage the
surface.
Stainless Steel Surfaces (on some models)
Do not use u steel wool pad; ff will scratch
the surface.
To clean the stainless steel surface, use
warm sudsy water or a stainless steel
cleaner or polish.Alwags wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
Notional Parts Center 800.626.2002
ge.com
Gloss Window
(on some models)
To clean the outside glass finish, use a glass
cleaner Rinse and polish with a drg cloth.
31