Using Theprinterstatus Monitor P Rogram - Brother MFC 7550MC Setup Manual

S©FTWA E gE iNG £ "
File
Send settings
Load settings
Save settings
Save As command
Load Default setting
Function
Sends the settings made within the RPC to your machine
(MFC).
Loads the settings you stored in your disk or hard disk to
the RPC.
Saves the RPC settings to your disk or hard disk.
Saves the RPC settings to your disk or hard disk as a
printer command string.
Loads the default settings to RPC.
DirectAccessCategory
Item Function
Print Form
Self Print
Reset Printer
Prints the MFC's character/symbol sets
"CHARASET.PRN" or any print files you have made.
Executes the MFC's self test.
Resets the MFC. The data remaining in the MFC and the
printer settings will be cleared.
Console Config Category
Item Function
Environment Sets the Printer Port, Buzzer on/off, Color for Remote Print
Console
Status Monitor Sets the hot-key for waking-up the RPC.
For more information on RPC, see the Help Information within the program.
Using the Printer Status Monitor Program
Type C:\RPCX>STMX and press the Enter key to make the Printer Status Monitor
Program stay resident in your computer memory. If there are any changes to the
printer status, it displays a message on your computer screen.
If the Printer Status Monitor program stays resident in your computer, you can
monitor the printer status on your computer screen immediately by using the hot-key
(Ctrl+Alt+R).
To remove the Printer Status Monitor program from your computer memory, type
C:\RPCX>STMX/R and press the Enter key.
3-21