Table of Contents
Advertisement
Available languages
Available languages
USING A PLYWOOD
TABLE TOP (SOLD
SEPARATELY) (Fig. 9)
Some tools, such as table
saws, require adding a wood
tabletop
(not included)
for
proper mounting to this tool
stand for stability.
For this
purpose there are 8 holes (0)
(2 in each corner) of the 4
tabletop
supports
to mount
a wood tabletop
(mounting
screws sold separately).
We recommend
using a 24-in.
long X 18-in. wide X 3/4-in.
thick plywood
tabletop
(sold separately).
1.
Turn the stand upside
down on top of the
plywood
table top and
mark the positions
of the
8 attachment
holes (2
each on tops of each
tabletop
support).
2.
Drill holes in plywood
at
the locations of the marks.
3.
4.
5.
Fig. 9
!
0
Place the stand in the
upright position
and place
the plywood
on top of
the stand.
Fig. 10
©
Place mounting screws (P),
sold separately,
into the 8
holes in plywood
and through the
attachment
holes in the
tabletop
supports.
Insert nuts (Q), sold separately,
onto screws and tighten securely.
\
/
!
//
22305
ManuaLRevised_12
0528
Page 13
Advertisement
Table of Contents
