Advertisement
Careand cleaning of the vent hood.
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of
the vent hood.
Receptacle
Socket
%
Bulb
/
Glass c over
Hood Lights
NOTE," The glass cover should be removed
onlywhen
cold. Wearing latex gloves may
offer a better
grip.
CAUTION. Before
replacing
our
light bulb, disconnect
the electrical
power
to the hood at the main fuse or circuit
breaker panel
Be sure to let the light cover and bull) cool
completely:
For your safi_t,i, do not touch a hot bulb
with bare hands
or a damp cloth.
To remove:
[]
Tm'n the glass coxer counterclockwise
tmfil the glass coxer (leaI_ the socket.
[]
Using gloves or a dry cloth, remoxe
the bulb by pulling
it straight out.
To replace:
[]
Use a new 12-\o]t, 20-watt (maximum)
Hah)oen
bulb for a (;-4 base.
[]
Using_ , ,.,,loxes or a dry, cloth
reinoxe
the new bulb from its oacka ,ino
Receptacle
[]
Push the 1)ulb straight
into the
receptacle
all the way.
]
Place the olass coxer onto the socket
and mrn clockwise
tmti] secure.
[]
For improved
lighting,
clean the glass
cover ti'equently
using a damp cloth.
This should
be done when
the hood
is completely
cool.
Reconnect
electrical
power
to
the hood.
NOTE: Do not touch the new halogen bulb
with bare fingers. Touchingthe bulb with
bare fingers will significantlyreduce the
fife of the bulb.
6
Advertisement
