Specifications; Features; Lock-Off Button; Switch - Craftsman 315.114010 Operator's Manual

SPECIFICATIONS
Motor . ................................................................................................................................................................. 19.2VoltDC
Switch........................................................................................................................................................... Lock-Off Switch
StapleSpeed .................................................................................................................................................. 30shots
/ min.
Staple Size .................................................................................................................. 1/2" crown width, 1/4" to 9/16" length
Brad Size ............................................................................................................................................. 18 gauge, 5/8" length
Magazine Capacity .......................................................................................................................................... 84 staple/brad
Charger Input ...................................................................................................................................... 120 V. 60 Hz, AC only
Charge Rate ................................................................................................................................................................. 1 Hour
KNOW YOUR NAILER/STAPLER
See Figure 1.
Before attempting to use this tool, familiarize
yourself with all operating features and safety
requirements.
_IL WARNING: Do not allow familiarity with this tool to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict severe
injury.
LOCK-OFF BUTTON
This toot is equipped with a "lock-off" button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to pull the switch trigger.
The lock resets each time the trigger is released. Note: You
can depress the lock-off button from either the left or right
side.
SWITCH
To turn tool ON, depress the lock-off button and pull switch
trigger. Release switch trigger to turn toot OFF.
,_ WARNING: If any parts are missing, do not operate
this tool until the missing parts are replaced. Failure to
do so could result in possible serious personal injury.
7