Frigidaire Gallery Series Use & Care Manual page 5

Note: Prior to assembly remove protective film from stainless steel parts
Battery :
r i _ ii I
Cap
Spring
Assembly
Nut
Cylinder Bracket
i
I
Fig. 1
Ignitor Attachment
1. Remove the ignitor cap, spring assembly, bat-
tery and lock nut from ignitor. (See Fig. 1)
.
Insert the threaded section of the ignitor into
the U-shaped cut out of the ignitor mounting
bracket. (See Fig. 2)
.
Insert the threaded section of the ignitor
through
the hole in the shelf and secure to
shelf using the lock nut. (Use the ignitor
assembly diagrams to determine which
ignitor goes with which shelf depending on
grill model.) Tighten Securely. (See Fig. 3)
.
Re-insert the battery, positive side first, and
spring assembly and attach the ignitor cap.
(See Fig. 4)
.
Repeat above steps for second ignitor
on the Side Burner.
Fig. 2
Fig. 3
Fig. 4
GL51 Ignitor Assembly
Side Burner (Double Wire)
Left Shelf (Four Wire)