Craftsman nEXTEC 320.30566 Operator's Manual page 13

4_
5_
Align the grooves on the
scraler blade with the four
raised ribs on the drive shaft;
_ut the scraiJer blade onto
the drive shaR (Fig. 29),
With your gloved hand
holding the blade, insert and
depress the flange bolt until
you hear a crick indicating
that the scra let blade
is secured
6, Push the cuickorelease _ever
with your talm to lock the
driver shaft (Fig. 10),
NOTICE: The ribs on the
shaft and the grooves in the
appRication too_s permit a firm
connection of the aHlication
tools in increments of 45 '° around
the shaft, from 0° to 315°(Fig
30)° Amply the aii_ cation tool in
the orientation aH, romriate to the
task at hand.
USING THE SCRAPER
BLADE (Fig. 31)
1. h_sertthe battery tack into
the multi-tooL
Fig. 30
2. Turn on the tool and allow
it to come to the full
desired sleed.
To scra_;e, _,ut the tool on
the workpiece at a flat
angle (not more than 20°},
and aHly onUy light
iressure so as to not cut
into the surface
To cut and remove carwet,
_lace the Scrater Blade
vertically on the worktiece,
and cut the cariet. Then
i_ace the scraler blade
between the cariet and the
floor to the coverings and adhesive residue off.
CARBIDE TRIANGULAR RASP (67654)
DESCRIPTION (Fig. 32)
Carbide tilled triangular
grout ras_.
Designed for grout, masonry,
thinset, wood and removal of
hardened adhesives on the
wall tiles.
t Triangular ras_ is also
commatib0e with the Fein
Mu Iti_Master tool.
TO INSTALL THE CARBIDE
TRIANGULAR RASP
CAUTION: Wear
rotective gloves,
,
2_
3_
Remove the battery mack
from your multiotool.
Push the cuick-release lever
fully o0en with your ialm to
Roan the range bolt (Fig, 33)o
Remove the flange bo_o
Ensure that the inner threads
and the drive shaft are dean°
4_
5_
Align the grooves on the
carbide triangular rasi with
the four rai_d ribs on the
drive sha_; m,ut t he rasm onto
the drive shaft (Fig, 34},
With your gloved hand
holding the blade, insert and
depress the flange bolt until
you hear a click indicating
that the rasw is secured
6. Push the cuick-release lever
with your maimto lock the
driver shaft (Fig. 10}..
30566 Ma#ual Re,_ised_$_ 0T1.5 Pag÷ 24 30566 M÷nuaLRevised llZ)f15 Pa_ 25