Craftsman nEXTEC 320.30566 Operator's Manual page 11

3_
4_
.
Ensure that the inner threads
and the drive shaft are clean
Align the grooves on the
circular cutting blade with the
four raised ribs on the drive
shaft; Jut the blade onto the
drive sha& (Fig, 17)°
With your gloved hand
holding the blade, insert and
depress the flange bo_ until
you hear a click indicating
that the blade is secured,
6, Press the ouickoreiease lever
with your ialm to lock the
driver shaft (Fig 10)o
NOTICE: The ribs on the
shaft and the groovesin the
application too_s permit a firm
connection of the a_ilication
tools in increments of 45 ° around
the shaft from 0 ° to 315 ° (Fig°
18)oAi_ly the aii_ication tool in
the orientation aHroiriate to the
task at hand.
CUTTING WITH THE CIRCULAR
SAW BLADE (Fig. 19)
1. #]serLthe battery lack into
the multi°tooL
2. Securely damt the
workeiece if necessary_
& Draw cutting lines on
the work miece.
4 Turn on the tool and allow
it to come to the ful_
desired s_eed
5_ Attly the the cutting blade
to the work_iece and make
the cut.
Fig, 17
F_g.18
Fig 1
CARBIDE CIRCULAR
BLADE (67650}
DESCRIPTION (Fig. 20}
The Carbide Circular Blade is
designed to cut out the grout
around wall tiles, it can also
be used to cut tlaster, _orous
concrete and masonry°
Carbide.otiHed, circular
grout disc..
Designed for grout, i[aster,
masonry or iorous concrete
removal around the
wall tiles.
Compatible with the
Nextec Multi,oTool and
Fein MultioMaster.
TO INSTALL THE CARBIDE
CIRCULAR BLADE
,_ CAUTION: Wear
irotective gloves.
WARNING: Do not attach
the carbide circular blade facing
backwards (Fig° 21), which may
hurt the user.
1.
2_
3_
Remove the battery lack
from your multi-.tooi.
Push the cuickorelease lever
fully oten with your e,almto
_oosen the flange bolt (Fig, 22)°
Remove the flaqge be&
Ensure that the inner threads
and the drive shaft are dean..
Fig. 20
Fig.21
Fig. 22
x\
,;,, \ .
, j
30566 MaauaLRe_ised_:t&O?'lo5 Pa_ 20 30566 ManuaLRevised J I 07!5 Page 21