Changing The Size Of Integrated Trace Files; Changing The Number Of Integrated Trace Files - Hitachi XP P9500 User Manual

Changing the Size of Integrated Trace Files

To change the size of integrated trace files:
1 In the Hitachi Network Objectplaza Trace Library setup menu, type 1 and
.
then press the Enter key.
A screen to set the size of the integrated trace file appears. The current
value is displayed in Current Size(KB).
2 Enter the desired size in New Size(KB).
.
You can specify a value from 8 to 8192 (KB). The default value is 256.
Set this to a value larger than the buffer value set in step 2 of
the Buffer Size Per Monitoring Interval Duration on page
recommend value is 4096 for collecting an integrated trace.
If you do not want to change the integrated trace file size, leave New
Size(KB) blank, type !, and then press the Enter key to return to the
Hitachi Network Objectplaza Trace Library setup menu.
3 Press the Enter key.
.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.

Changing the Number of Integrated Trace Files

To change the number of integrated trace files:
1 In the Hitachi Network Objectplaza Trace Library setup menu, type 2 and
.
then press the Enter key.
A screen to set the number of integrated trace files appears. The current
value is displayed in Current Number(KB).
2 Enter the desired number in New Number(KB).
.
The default value is 4. You can specify a value from 1 to 16. The value set
here becomes the maximum of n in /var/opt/hitachi/HNTRLib2/spool/
hntr2n.log. The recommended value for integrated trace collection is 8.
If you do not want to change the number of integrated trace files, leave
New Number(KB) blank, type !, and then press the Enter key to return
to the Hitachi Network Objectplaza Trace Library setup menu.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Changing
3-132. The
3-131