Random Play; Repeating Tracks; Tray Lock Function - JVC MX-KA3 Instructions Manual

Using the CD Player
Random Play
'Ihe tracks of all the CDs will play in no special order when you
use this mode.
• To use Repeat Play for Random Play, press the REPEAT but-
ton to select "ALL" or "1" before starting playback. For details,
see "Repealing Tracks'mentioned below,
1
In Stop mode, set the CD Player in Random
Play mode.
On the Unit
Press the RANDOM button to light the "RANDOM" indicator.
At the same time, "RANDOM" appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the "RANDOM"
appears on the display.
'Ihe "RANDOM" indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM "_ RANDOM -'_ Blank display (Normal Play) -'_
(back to the beginning)
2
Press the CD 1_/11 button.
The tracks on all the CDs are played in random order,
To stop playing,
press the • button.
To skip a track during playback,
press the _-1_i bullon to
jump to the next track in the random sequence.
TO exit Random Play mode, while the CD Player is stopped,
press the RANDOM bulton on the Unit or the PROGRAM/RAN-
DOM bullon on the Remote Control again to light off the "RAN-
DOM" indicator, Normal Play resumes.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Press the REPEAT button.
REPEAT 1CD:
REPEAT 1:
'Ihe Repeat indicator changes with each press of the button, as fol-
lows:
ALL -_ 1CD -" I -'_ Blank display "_ (back to the beginning)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
In Program Play mode, repeats all the tracks in
the program.
In Random Play mode, repeats all the tracks on
all the CDs in random order.
Repeats all tracks on one CD, (Selectable in
Normal Play only)
Repeats one track.
TO stop playing, press the • button. Changing the source to the
other (e.g. 'I uner) will also stop playing.
TO exit Repeat mode, press the REPEAT button until the Re-
peat indicator on the display goes out.
i_ Repeat mode remains in effect during the following Play Mode
changing:
a. PROGRAM PLAY MODE"--_NORMAL PLAY MODE
b. RANDOM PLAY MODE _"_NORMAL PLAY MODE
c, PROGRAM PLAY MODE"--_RANDOM PLAY MODE
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close ----- b utton on the Unit is pressed.
Locking the Tray
1[ Turn on the System and enter CD mode.
2 While pressing down the • button, press the
CD Open/Close A_A button on the Unit,
"LOCKED" appears on the display.
L
UL J.l
• If you try to open the tray by pressing the --_ button,
"LOCKED" appears on the display to let you know that the tray
has been locked.
Unlocking the Tray
Repeat above steps 1 and 2.
"UNLOCKED" appears on the display.
,,,,,, ,-,,- I_,,E
UIqLUL JJ
Now, you can use the tray normally,
• Even after the system is unplugged, the tray lock condi-
tion wifl be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera
tion
15