Sending Faxes; Receiving Faxes - Sharp FO-90 Operation Manual

all-fo90A.book Page 2 Monday, December 20, 1999 1:27 PM
Quick Reference Guide

Sending Faxes

Place your document
(up to 5 pages) face
down in the document
feeder.
Normal Dialling
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person
answers, ask them to press their Start
key).
4. Press:
START/
MEMORY
Rapid Key Dialling
Press the appropriate Rapid Key.
Transmission will begin automatically.
Speed Dialling
SPEED
1. Press: DIAL
2. Enter 2-digit Speed Dial number.
3. Press:
START/
MEMORY

Receiving Faxes

Press the RESOLUTION/RECEPTION
MODE key until the arrow in the display
points to the desired reception mode (make
sure the document feeder is empty).
05 NOV 10:30
RESOLUTION/
RECEPTION MODE
05 NOV 10:30
05 NOV 10:30
05 NOV 10:30
2
FAX mode: The fax machine automatically
answers on the set number of rings and
receives the incoming document.
TEL mode:
SPEAKER
TEL/FAX mode: The fax machine
automatically answers on the set number of
rings and receives faxes. Voice calls
(including manually dialled fax
transmissions) are signalled by a special
ringing sound.
A.M. mode: Select this mode when you go
out to receive both voice messages and
faxes.
RECORDING AN OUTGOING
MESSAGE
1. Press:
Display shows:
2. Press:
3. Press 1 (GENERAL) to record an outgo-
ing message for the answering machine.
Press 2 (TRANSFER) to record an outgo-
ing message for the Transfer function.
4. Pick up the handset, press the START/
MEMORY key, and speak into the handset
to record your message.
FAX
TEL
TEL/FAX A.M.
5. When finished, press the STOP key or
TEL FAX
replace the handset.
TEL/FAX A.M.
6. Press:
TEL FAX
TEL/FAX A.M.
TEL FAX
TEL/FAX A.M.
Beep
START/
MEMORY
RECEIVING
FUNCTION
0
OGM RECORDING
START/
MEMORY
STOP