Connecting The Tv - Sharp HT-CN300W Operation Manual

Caution:
Turn off all other equipment before making this connection.
Notes:
z Refer to the operation manual of the equipment to be connected.
z Insert the plugs fully to avoid fuzzy pictures or noise.

„ Connecting the TV

Connect the TV to the main unit with the supplied video cable. If your TV has S-video
input socket, connect the commercially available S-video cable to enjoy clearer
images on DVDs.
To video input socket
Video cable (supplied)
To S-video input socket
S-video cable
Notes:
z Change the TV input in accordance with the connected socket.
z Do not connect other equipment between the TV and this unit. If they are
connected via a VCR, pictures may be distorted.
z When the video and S-video cables are both connected, the images from the S-
video input socket appears on your TV.
Caution:
The settings appear only when the TV is connected with a video cable. They
will not appear when the TV is connected with an S-video cable.
During the tuner or auxiliary mode, the TV screen display will not be shown.
(See page 23 for the TV screen display.)
Example: TV screen display
„ Connecting the DVD player
Use the video cable or the S-video cable for receiving images. The S-video cable can
realise clearer images. For audio, connect with the optical digital cable or the coaxial
digital cable.
To connect to the video socket with the video cable:
Optical digital audio cable
Video cable
TV
Note:
When connecting a DVD player with a video cable, be sure to use another video
cable for the TV.
To connect to the S-video socket with the S-video cable:
Optical digital audio cable
S-video cable
Note:
When connecting a DVD player with an S-video cable, be sure to use another S-video
cable for the TV. This unit cannot convert the S-video signal into the video or other
signals.
Switching the DVD audio input:
Switch the DVD's audio signal with the remote control according to the connected
socket, "DIG1" (optical) or "DIG2" (coaxial) (see page 18).
Optical digital socket cap:
When using the optical digital socket, remove the cap
first. After using the socket, replace the cap.
Coaxial digital
audio cable
DVD player
To video output socket
Coaxial digital
audio cable
DVD player
To S-video output socket
02/7/11 HT-CN300W_A_2.fm
HT-CN300W
10