Md-Dr370H Tinsza024Awzz; Editing A Recorded Minidisc - Sharp MD-DR370H Operation Manual

Editing a Recorded MiniDisc (continued)
MD-DR370H
ENGLISH





To move a track
1
Play the track to be moved, and press the
ton.
2
Press the MENU/ENTER button.
3
Press the or button repeatedly to select
"EDIT".
4
Press the MENU/ENTER button.
5
Press the or button repeatedly to select
"MOVE".
6
Press the MENU/ENTER button.
To cancel the operation, press the :OFF/HOLD but-
ton.
7
Press the or button to select the direction.
8
Press the MENU/ENTER button again.
The track will be moved, and the unit will be paused at
the beginning of the track.
E-31

MD-DR370H TINSZA024AWZZ

When a track has a name before dividing:
The two new tracks will have the same name. However, in
the "TOC FULL" condition, the second track may not be
but-
named.
Total number of tracks that can be divided:
Each disc can hold up to 255 tracks. However, even if the
number of assigned tracks has not reached 255, it might
not be possible to make any further divisions of tracks.
To combine two non-adjacent tracks:
First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine them
using the COMBINE function.
When one or both tracks to be combined have a
name:
The first track name will be used. However, when the first
track does not have a name, the second track name will
be used.
In the following cases, tracks may not be combined.





Tracks recorded by different input modes/sources can-
not be combined.
Examples:





Digital recorded track and analogue recorded track.





Different recording modes (stereo recording, 2 times
long recording, 4 times long recording, monaural re-
cording).





Tracks whose recording time is less than 12 seconds.
04/1/5 MD-DR370H_SEEG5.fm