Recording - Sharp MD-DR370H Operation Manual

Recording

MD-DR370H
ENGLISH
Before recording
Cancel the hold mode.
The portable MD does not work whilst in the hold mode.
As for the details, see page 9.
1
Press the REC button.
2
Begin playback on the stereo system connected to
this portable MD.
E-11
MD-DR370H TINSZA024AWZZ
3
Press the or button to adjust the recording
level.
Analogue recording (connecting with analogue ca-
ble)
Adjust the recording level so that
the maximum sound volume from
the source makes the reading
swing somewhere between -4 dB
and 0 dB.
Digital recording (connecting with digital cable)
You can adjust the level in 1 dB
increments between + 10 dB and
- 10 dB.
+ 10 dB to - 10 dB
Once you adjust the recording level, the setting is re-
tained even after the recording stops. (For cancellation
instructions for the digital recording level, see page 22.)
The sound from the earphones does not change even if
the digital recording level is adjusted.
4
Press the PAUSE button on the stereo system to en-
ter the playback pause mode.
Here, you can search for the track to be recorded.
04/1/5 MD-DR370H_SEEG3.fm
0 - 30