Before Connecting Components - Yamaha Digital Sound Projector HTY-750 Owner's Manual

Before connecting components

■ Cables used for connections
Audio
Audio pin cable (supplied)
(White)
(Red)
Optical cable (supplied)
Digital audio pin cable (supplied)
(Orange)
Subwoofer pin cable
5
System connector cable
Video
OSD video pin cable (supplied)
(Yellow)
■ Notes on connecting the optical cable
• Pull out the cap before connecting the optical cable.
When you are not using the optical cable, be sure to put
the cap back in place.
• When inserting the cable into the optical digital jack,
(White) make sure the direction is correct.
(Red)
Cap
■ Affixing cables
To prevent cables from becoming unplugged, place the
supplied cable clamp with the open side facing upward,
attach it to the rear panel of this unit in a suitable position,
and then affix cables in the cable clamp.
(Orange)
(Yellow)
Connections
Optical cable
Attach to this unit
17
En