Connecting To A Pc Desktop Computer; Connecting The Computer Cable - Epson PowerLite 5600p User Manual

Connecting to Additional Equipment
80

Connecting to a PC Desktop Computer

You can connect the projector to any IBM-compatible PC. This
section includes instructions for the following:

Connecting the computer cable

I
Connecting the mouse cable (if you want to use the remote
I
control as a mouse)
Connecting the audio cable (if you'll be projecting with audio)
I
Follow the steps in each section for the cables you need to connect.
Before beginning, make sure the projector and computer are turned
off. If you need help with positioning the projector, see page 10.
Connecting the Computer Cable
1. Disconnect the monitor cable from the video port on the back of
the computer and set it aside. (You won't be able to use the
monitor while the projector is connected.)
2. Connect one end of the computer cable to the projector's
(analog) port, as shown.
Computer 1
computer cable
3. Connect the other end of the cable to the computer's video port.
4. Tighten the screws on the connectors.
Computer 1 port