Creating Your Own Startup Screen; Capturing The Image - Epson PowerLite 5600p User Manual

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector, and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use.

Capturing the Image

Start by displaying the image you want to use. It can be an image from
either a computer or video source such as a DVD player or digital
camera. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the button on the control panel or remote control.
Menu
You see the menu screen.
2. Press the down arrow (control panel) or press down on the
button (remote control) to highlight the
then press .
Enter
Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
:Return :Execute
3. When you see the screen shown at right, select
. A selection box displays over the image.
Enter
4. Use the arrow buttons on the control panel or the
on the remote control to select the area of the image you want to
use. Then press
Enter
5. When you see the message "Do you use this image?" select
and press .
Enter
button. The image can be a company
User's Logo
Execute
.
Enter
menu,
and press
Yes
button
Enter
Yes
Fine-tuning the Projector
User's Logo Capture
Do you use the present image
as a user's logo?
Yes No
:Return :Select :Execute
51