Speaker Layout - JVC DD-8 Instructions Manual

Network media system
Hide thumbs Also See for DD-8:
Table of Contents

Advertisement

Available languages

Available languages

Connecting the subwoofer to the
main unit
Peel off the protective
Subwoofer
sheets from both sides of
the subwoofer.
Rear view
System cable (supplied)
Align the 5 marks on the terminals and the sys-
tem cable.

Speaker layout

Center surround speaker
Left speaker
Main unit
Rear view
Right speaker
Subwoofer
■ CAUTION
• An incorrect connection may damage the speak-
ers. Properly connect the cables to the speaker
terminals.
• Do not short-circuit the ª and · speaker termi-
nals. Doing so may damage the main unit.
• The supplied speakers are manufactured exclu-
sively for use with the supplied main unit as
parts of the DD-8/DD-3 system. Do not connect
the supplied speakers to devices other than the
supplied main unit. Doing so may damage the
speakers.
• Do not connect other speakers together with the
supplied speakers. The change in impedance
may damage the main unit and the speakers.
• Improper speaker cable connection spoils the
stereo effect and sound quality.
• Most of the supplied speakers* are magnetically
shielded, but color irregularity may occur on the
TV depending on some conditions. To prevent
color irregularity, set up the speakers following
the instructions below.
1. Turn off the main power of the TV before
setting up the speakers.
2. Place the speakers enough distance from the
TV so that they do not cause color irregularity
on the TV.
3. Wait for approximately 30 minutes before
turning on the main power of the TV again.
* The subwoofer for DD-3 is not magnetically
shielded. With the exception of this
subwoofer, the supplied speakers are
magnetically shielded.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents