Connecting The Tv; Cable System Or Vhf/Uhf Antenna System; Cable System And Vhf/Uhf Antenna System; Hd Cable Box/Hd Satellite Box - Sony BRAVIA KDL-40Z4100 Operating Instructions Manual

3. Connecting the TV
You can enjoy high-definition and standard-
definition digital programming (if available in
your area) along with standard-definition analog
programming.
• This TV is capable of receiving unscrambled digital
programming for both cable (QAM and 8VSB) and
external VHF/UHF antenna (ATSC).
• It is strongly recommended that you connect the
CABLE/ANTENNA input using a 75-ohm coaxial
cable to receive optimum picture quality. A 300-ohm
twin lead cable can be easily affected by radio
frequency interference, resulting in signal degradation.
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
cable _ _ Rear of TV
CABLE/ANTENNA
Use an optional A-B RF switch (not supplied) to
switch between the cable and over-the-air antenna
programming, as indicated below.
A-B RF switch
Cable _[_ _ ['[-_ Rear of TV
Antenna ,,,m_ _ _ CABLE/ANTENNA
• Be sure to set the
Signal
Type setting to Cable or
Antenna in the Channel settings for the type of
input signal you choose (see page 47).
You can enjoy high-definition programming by
subscribing to a high-definition cable service or a
high-definition satellite service. For the best
possible picture, make sure you connect this
equipment to your TV via the HDMI or
component video (with audio) input on the back of
your TV.
Shown with HDMI Connection
Rear ef TV
¢ ;'_';;5 /?;; ::_ iN ....
¢/ k,¢;/ <_/2
...., , ..; j,h ..J +._
, 0
5
:)?Y )
,,,,,,,,,,,,,,,,,,, HDMI cable
CATV/Satellite
HD cable box/ |a_ ntenna
cable
HD satellite box
12