GE RAK148P1 Owner's Manual & Installation Instructions page 16

Programming.
• Heat temperature is displayed
(60°F to 85°F)
10.Press the
adjust heat set temperature.
11.Press the Hold button to advance to the next screen.
• Cool temperature is displayed
(60°F to 85°F)
12.Press the
adjust cool set temperature.
13.Press the Hold button to advance to the next screen.
Repeat steps 1–13 to program each day of the week individually
or follow the instructions below to program every day the same
as Monday. When programming is complete, slide the Function
switch to Heat or Cool to exit Programming Mode.
Repeat Programming
Once the entire Monday (Day 01) schedule is set, the following
procedure can be used to copy the Monday schedule for every
day of the week.
After the complete Monday schedule is set (see Programming,
above), you will be at the "Day" screen:
1. Press the
01 screen displays.
2. Press the
2 seconds. The days of the week
stop flashing, locking the settings into memory. Once the
schedule is locked in, you can go through each day and
make any required changes. This feature speeds up the
programming of the standard weekday/weekend schedule.
3. Slide the Function switch to Heat or Cool to exit
Programming Mode.
16
or button to
or button to
button once. Day
button and hold for
DAY
PROG
AM
HEAT
MORN
COOL
DAY
PROG
AM
MORN
DAY
PROG