Advertisement
TOOL USE AND CARE
• Store idle tools out of reachof children
and other untrainedpersons.Toolsare
dangerousin the hands of untrained
users.
• Maintain tools with care. Properly
maintained tools are less likely to bind
and are easier to control.
• Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tool's operation. If damaged, have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
Use only accessories
that are
recommended
by the manufacturer
for
your model.
Accessories
that may be
suitable
for one tool may create a risk of
injury when
used on another
tool.
SERVICE
• Tool service must be performed only by
qualified repair personnel. Service or
maintenance
performed by unqualified
personnel may result in a risk of injury.
• When servicing a tool, use only identical
replacement parts. Follow instructions in
the maintenance
section of this manual.
Use of unauthorized
parts or failure to
follow maintenance instructions may
create a risk of electric shock or injury.
Before you begin, make sure your car is
clean and dry. The work area should be
dry also. If necessary, remove road tar
with a general cleaner before polishing.
Also, remove excess grease spots, bug
stains, etc.
NOTE: The Wax & Polishing Solution
containers shown in the illustrations are
representative.
Yours may look different.
A
Place the blue wax applicator bonnet on
pad as shown. Make sure the elastic is
tucked down securely and evenly around
the underside of the pad.
C FOR LIQUID WAX
Apply three or four swirls of Cleaner/Glaze
over the wax on the wax applicator
bonnet. DO NOT APPLY WAX DIRECTLY
TO CAR. This first application should do
about 1/4 of the car. For the second and
third applications of wax, use half the
quantity stated above. The bonnet will not
absorb as much when reloading.
B FOR PASTE WAX
Spread about a heaping teaspoonful of wax
evenly over the entire surface of the wax
applicator bonnet. Use a putty knife or any
flat object. DO NOT APPLY WAX DIRECTLY
TO CAR.
_
D
Tool is equipped with cord lock feature to
prevent the extension cord from detaching
during use. Plug cord into unit, then feed
the cord as shown.
3
Advertisement
