Adding Or Replacing Xl 2 Motherboard Memory - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

TeamPoS 3000 XL and XL
7.5.2 Adding or Replacing XL2 Motherboard Memory
Caution: Be sure to observe all ESD precautions and power off procedures.
The TeamPoS 3000 XL
1GB or 2GB SO-DIMM memory in different combinations.
1. Remove the rear panel, (See Section 5.1.2).
2. Disconnect the power cable from the controller.
3. Remove the front panel (See Section 5.1.1). The yellow LED should be off (See Section
1.2).
4. Remove the motherboard assembly (See Section 5.2).
D900000145
2
2
Motherboard has two memory sockets or slots and can use 512MB,
Issue 3
Maintenance
7-19