Chapter 3 Troubleshooting; For Macintosh Users - Fujitsu MDG3064UB Maintenance Manual

CHAPTER 3 TROUBLESHOOTING

3.1
3.2

3.1 For Macintosh Users

The following describes troubleshooting of the DynaMO MO drive connected to a
Macintosh computer.
An inserted MO disk is not mounted on desktop.
Is the MO disk drive properly connected to the Macintosh computer?
Verify that the MO disk drive and the Macintosh computer are connected to
each other properly. If two or more devices are connected to one another, also
check that all other devices are connected properly.
Has a device driver been installed?
If a device driver has not been installed, install a driver following the steps
described in "2. Installation" of the DynaMO User's Manual. The manual is
provided together with the drive unit.
Has a disk been initialized in proper format?
An MO disk formatted improperly cannot be mounted on desktop. Initialize
the disk in a format appropriate for the product.
Has a disk been initialized?
An MO disk that has not been initialized cannot be mounted on desktop.
Initialize the MO disk as described in the User's Manual.
An MO disk cannot be dismounted.
Has an MO disk icon on desktop been thrown away to "Trash" box?
On a Macintosh computer, an MO disk is dismounted by throwing an MO
disk icon away to "Trash" icon (by dragging and dropping an MO icon onto
"Trash" icon). Usually, pressing the eject button does not dismount an MO
disk.
C156-F046-01EN
For Macintosh Users
For Windows Users
3-1