Fujitsu PRIMERGY RX200 S2 User Manual page 184

Chapter 7 Installing Internal Options
4
Remove the card locking frame.
1. Hold the card locking frame by both ends where green "LIFT UP" stickers are
applied.
2. Twist your wrists inward and lift the frame gently with your fingers.
5
Remove the slot cover from the card locking frame.
184
Remove it carefully. Parts in the frame may come off.
2
2
1
Green stickers (LIFT UP)
Slot cover
The slot cover for PCI slot 1 is composed of a low profile slot cover and an extension slot
cover.
Extension Low profile
slot cover slot cover
Be sure to keep the removed slot cover for later use.
Card locking frame
Gently lift upward