Advertisement
SWITCH LOCK
See Figure 4.
The switchtrigger can be lockedin the OFF position.This
feature can be used to prevent the possibilityof accidental
startingwhen not in use. To lock switchtdgger, push the
directionof rotationselector (Forward/Reverse Selector)
to the center position.
SELECTOR WITH
CENTER LOCKPosfrlON
FORWARD
A
WARNING:
Battery tools are always in operating
condition.Therefore, switch shouldalways be locked
when not in use or carrying at your side,
REVERSIBLE
KEYLESSCHUCK
See R'gum 5.
Your drillhas e keylesschuck As the came implies,you can
handtightenor releasedrillbits in the chuckjaws. Grasp and
hold the collar of the chuck with one hand. Rotate the chuck
body with your other hand. The arrowsonthe chuck
indicate whichdirection to rotatethe chuck bodyin orderto
LOCK (tighten)or UNLOCK (release)the drillbit.
UNLOCK
CHUCK
CHUCK
(RELEASE)
COLLAR
TRIGGER
Fig. 4
(TIGHTEN)
WARNING:
Do not hold chuck bedywith one hand
and use power of the drillto tighten chuck jaws on
drill bit, Chuck body could slip in your hand or your
hand could slipand come in contact with rotatingdrill
bit. This could cause an accident resultingin serious
persona] injury.
See Figure 4.
This tool has the feature of being reversible. The direction
of rotation is controlled by a selector locatedabove the
switchtrigger. With the drill held in normal operating
position,the directionof rotationselector should be
positionedto the left of the switeh for drilling.The drilling
directionis reversedwhen the selector is to the right of
the switch. When the selector Is in center position,the
switchtrigger is locked.
_lh CAUTION:
To prevent gear damage, always allow
chuck to come to a complete stop before changing
the directionof rotation.
To stop, release switchtrigger and allowthe chuckto come
to a complete stop.
10
Advertisement
