Default Settings - Brother BES-1260BC Instruction Manual

Chapter 6 Embroidering
Resets changes of the machine setting to the default.
1.
2.
156

Default Settings

Items for setting and initialization are as follows:
Speed Range
Head Operation Suspend
Hoop Feed Position
Embroidering Area
Thread Trimming
Boring
Thread Breakage Sensor
Automatic Step Back
Thread Breakage
Sensor Sensitivity
Automatic Feed Hoop
Return to the start point
Mending
Adjustment
Select [Default Settings] from Settings menu.
Click [OK].
BES-960BC BES-1260BC
Automatically selects the value suitable for the hoop type.
Cancels the head operation which is not set for rest on
the machine.
Returns to the machine home position.
Sets the size each for the selected hoop.
Inching motion
Thread removal feed length
Thread remaining amount
Boring
Data shift
All sensors are on.
Sensitivity
0
Not affected by the thread breakage sensor sensitivity
No
Yes
Automatically rest breakage error
Stop the machine at the mending end position
Stitches before mending
Trim during stop in mending setting
0.0 mm for X direction
0.0 mm for Y direction
Yes
15 mm (0.6 inch)
5
No
No
10
Yes
Yes
5 stitches
No