Default Settings
Resets changes of the machine setting to the default.
! Items for setting and initialization are as follows:
Speed Range
Head Operation Suspend
Hoop Feed Position
Embroidering Area
Thread Trimming
Thread Breakage Sensor
Automatic Step Back
Thread Breakage
Sensor Sensitivity
Automatic Feed Hoop
Return to the start point
Mending
Adjustment
Main shaft speed up setting
Hoop feed during temporary
stop
Reducing speed in a small
pitch
Thin / Thick material
Area Trace
Trace with needle No.1
Automatically selects the value suitable for the hoop type.
Cancels the head operation which is not set for rest on the machine.
Returns to the machine home position.
Sets the size each for the selected hoop.
Inching motion
Thread removal feed length
Thread remaining amount
All sensors are on.
Sensitivity
0
Not affected by the thread breakage sensor sensitivity
No
Yes
Automatically rest breakage error
Automatically reset the rotary hook thread entanglement error
Raise the presser foot when resetting the thread trimming error
Stop the machine at the mending end position
Stitches before mending
Trim during stop in mending setting
Conduct lock stitch when trimming thread
0.0 mm for X direction
0.0 mm for Y direction
Activating speed up of driving shaft
Low speed stitches
No
No
110 degrees (100 degrees for cap frame)
"8 corner" is selected.
Yes
BE-1204B-BC • BE-1206B-BC
Chapter 6 Embroidering
Yes
15 mm (0.6 inch)
5
10
No
3
No
No
Yes
Yes
1 stitch
No
No
6-41