Installation - GE Profile WPDH8800 Owner's Manual & Installation Instructions

Installation
Instructions
Models
WPDH8800, GPDH8800
Washer
I Ifgou hove ong questions, call 800.GE.CARE5 (800.432.2737) or visit
our
Websiteat:ge.com I
In Conodo, call 1.800.561.3344 orvisitgeopplionces.co
I
BEFORE YOU BEGIN
Read these instructions completelg and carefullg.
• IMPORTANT - Save these instructions
for local inspector's use.
• IMPORTANT - Observe
all governing
codes and ordinances.
• Note to Installer
- Be sure to leave these
instructions with the ConsumeE
• Note to Consumer - Keep
these instructions
for future reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time - 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
FOR YOUR SAFETY:
-_WARNING
• This oppliance must be properly grounded and
instolled as described in these Instollotion Instructions.
• Do not instoll or store oppliance in an oreo where
it will be exposed to water/weather. See Locotion
of Your Wosher section.
• NOTE: This appliance must be properlg
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
TOOLS REQUIRED FOR
WASHER INSTALLATION
GI 1/4" nut driver
CI 3/8" socket with ratchet
CI 3/8" open-end wrench
CI Adjustable wrench or 7/16" socket with ratchet
CI Adjustable wrench or 9/16" open-end wrench
CI Channel-lock adjustable pliers
E3Carpenter's level
PARTS SUPPLIED
CI Woter Hoses (2)
C] Cable Tie
CI Hose Guide
15