Jam; Misfeed Jam - Dell C1660w Color Laser Print User Manual

Jam

NOTE:
In this section, some procedures that use the Tool Box can also be performed using the operator panel or
Dell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool,
see "Understanding the Printer Menus" on page 125 and "Dell™ Printer Configuration Web Tool" on page 81.

Misfeed jam

Action
1 Remove the paper from the PSI, and then ensure that papers are
properly inserted on the MPF.
Is the problem recovered?
2a Use thick paper that is 216 gsm or less.
Is the problem recovered?
2b
Use thin paper that is 60 gsm or more.
Is the problem recovered?
2c Ensure that the envelope is properly loaded in the MPF as instructed in
"Loading Envelopes in the Multipurpose Feeder (MPF)" on page 156.
Is the problem recovered?
2d Ensure that the print media is not curled.
Is the problem recovered?
2e
Is the print media damp?
3a Fan the print media.
Is the problem recovered?
3b If the envelope is deformed, correct it or use another envelope.
Is the problem recovered?
3c
Turn over the print media.
Is the problem recovered?
4
Use print media that is not damp.
Is the problem recovered?
Yes No
The task is complete. Proceed to the action
corresponding to the
type of the print media
being used:
• Thick - 2a
• Thin - 2b
• Envelope - 2c
If performing manual
duplex printing, go to
action 2d.
If using paper other
than the above or if not
performing duplex
printing, go to action
2e.
The task is complete. Go to action 3a.
The task is complete. Go to action 3a.
The task is complete. Go to action 3b.
The task is complete. Go to action 3a.
Go to action 3c. Go to action 3a.
The task is complete. Go to action 3c.
If you are performing
manual duplex printing
or if using an envelope,
contact Dell.
The task is complete. Go to action 3a.
The task is complete. Go to action 4.
The task is complete. Contact Dell.
Troubleshooting
223