Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters. After executing this function and rebooting the
printer, all the menu parameters, except the parameters for the network, are reset to their default values.
For details, see "Resetting Defaults" on page 123.
Values:
Start
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
Using non-Dell™-brand toner cartridges may make some printer features unusable, reduce print quality and decrease
the reliability of your printer. Dell recommends only new Dell-brand toner cartridges for your printer. Dell does not provide
warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell.
NOTE:
Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Values:
Non-Dell Toner
Off
On
Apply New Settings
Restart printer to apply new settings
BTR Refresh Mode
Purpose:
To execute counter measures for curling/separating discharge of the paper.
Values:
BTR Refresh Mode Off
On
Apply New Settings
Restart printer to apply new settings
Click to initialize the system parameters.
Does not use toner cartridge of another manufacturer.
Use toner cartridge of another manufacturer.
After you complete the settings, click Apply New Settings to apply the changes.
Click Restart printer to apply new settings to apply the changes.
Does not automatically execute counter measures for curling/separating discharge of
the paper.
Automatically executes counter measures for curling/separating discharge of the paper.
After you complete the settings, click Apply New Settings to apply the changes.
Click Restart printer to apply new settings to apply the changes.
Understanding the Tool Box Menus
119