Tone And Pulse Dialing Mode (Canada Only); Selecting Your Language (Canada Only); Setting The Lcd Contrast; Sending In The Product Registration And Test Sheet (Usa Only) - Brother MFC 8870DW - B/W Laser - All-in-One Quick Setup Manual

8 Tone and pulse dialing mode
(Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press or
Tone).
Press OK.
5
Press Stop/Exit.
9 Selecting your language
(Canada only)
1
Press Menu.
2
Press 0.
3
Press 0.
4
Select your language (English or French) by
using or
5
Press Stop/Exit.
10

Setting the LCD contrast

You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu.
2
Press 1.
3
Press 8.
4
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
5
Press Stop/Exit.
to select Pulse (or
, and then press OK.
Setting Up the Machine
11 Sending in the product
registration and test sheet
(USA only)
1
Fill out the Product Registration and Test
Sheet.
2
Place the sheet face up in the Automatic
Document Feeder.
Note
Make sure (Fax) is illuminated in Blue.
3
Enter the toll-free fax number:
1-877-268-9575.
4
Press Start.
Note
• You will receive a confirmation fax of your Product
Registration.
• You can also register your product online using the
On-Line Registration link from the installation
CD-ROM or go to www.brother.com/registration
Now go to
the next page to install the driver and software.
11