Setting Your Station Id - Brother MFC 8870DW - B/W Laser - All-in-One Quick Setup Manual

6

Setting your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
03.Station ID
Fax:_
Enter & OK Key
5
Enter your telephone number (up to 20 digits)
on the dial pad, and then press OK.
(If your telephone number and fax number are
the same, enter the same number again.)
03.Station ID
Fax:908XXXXXXXX
Tel:_
Enter & OK Key
6
Use the dial pad to enter your name (up to 20
characters), and then press OK.
03.Station ID
Fax:908XXXXXXXX
Tel:908XXXXXXXX
Name:
Enter & OK Key
Note
• Refer to the following chart for entering your name.
• If you need to enter a character that is on the same
key as the previous character, press
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
the incorrect character, press Clear/Back.
to
to move the cursor under
Setting Up the Machine
Press One Two
key time times
2 A B
3 D E
4 G H
5 J K
6 M N
7 P Q
8 T U
9 W X
For more details, see "Entering Text" in
Chapter D of the User's Guide.
7
Press Stop/Exit.
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first
page of the transmission, the date and time it is
sent and an identification of the business or other
entity or other individual sending the message and
the telephone number of the sending machines or
such business, other entity or individual.
To program this information into your machine,
see Setting the date and time on page 13 and
Setting your station ID on page 14.
Three Four
times times
C 2
F 3
I 4
L 5
O 6
R S
V 8
Y Z
9