Table of Contents
Advertisement
» The connected iPod/iPhone/iPad starts
play.
• To pause/resume play, press
• To skip to a track, press fast forward/
backward keys.
• To search during play, press and hold
fast forward/backward keys, then
release to resume normal play.
• To navigate the menu, press MENU,
then press up/down keysto select, and
press OK to confirm.(for iPod and
iPhone only)
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Play from Bluetooth device
Pair with Bluetooth deivces
1
Press to select Bluetooth source.
» Paring starts automatically.
» LED under button on the main unit
flashes rapidly.
2
Turn on Bluetooth function on your device.
3
Search for Bluetooth devices that can pair
with your device.
4
When "PHILIPS DS8400" displays, select it
to start connection.
» Double beep tone confirmation is
heard and the LED turns on stably if
connection is successful.
» If the pairing cannot be completed
within 15 minute, LED turns off.
Tip
•
If your Bluetooth device is already paired with DS8400
before, you just need to find out the "PHILIPS DS8400"
on your Bluetooth menu, then confirm the connection.
•
To disconnect Bluetooth device
10
EN
1
Turn off the connected device or move it
beyond the communication range.
» LED flashes.
.
To erase Bluetooth paring information
•
1
Press and hold for 5 seconds.
» The unit beeps once after paring
Play audio files from Bluetooth
devices
•
Make sure the Bluetooth connection between the unit
and the device is active.
•
To start play, press
control.
•
To pause/resume play, press
•
To track up/down, press forward/backward
keys.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
•
Make sure that no iPod/iPhone/iPad is docked in the
speaker.
1
Press
2
Connect the supplied audio-in cable to:
• the AUDIO IN jack (3.5mm) on the
• the headphone jack on an external
3
Start to play the device (see the device
user manual).
information is cleared successfully.
Note
Note
to select audio-in mode.
back of the unit.
device.
on the remote
again.
Advertisement
Table of Contents
