Table of Contents
Advertisement
Charge the iPod/iPhone
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Play from Bluetooth device
Note
•
The effective operation range between the docking
system and the paired device is approximately 10
meters (30 feet).
•
Keep this docking speaker away from other electronic
devices that may cause interference.
1
Press to select Bluetooth source.
» The Bluetooth indicator blinks.
2
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3
Select "PHILIPS AD385" displayed on your
device for pairing.
» If connection is successful, the
docking speaker beeps twice, and the
Bluetooth indicator stops flashing.
• For some devices, you need to input
"0000" as pairing password.
4
Start music play on your Bluetooth device.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
7
EN
Note
•
Make sure that there is no audio detected from docking
connector in the speaker.
1
Press
to turn the docking speaker on.
2
Connect the MP3 link cable (not supplied)
to:
• the AUDIO-IN socket at the back of
the docking speaker.
• the headphone socket on an external
device.
3
Play audio on the device (see the device's
user manual).
Adjust volume
To adjust volume:
• Press +/- on your docking speaker; or
• Adjust the volume control of your
iPod/iPhone or external device.
Advertisement
Table of Contents
