6. Printing Procedures - Mitsubishi CP700E Operation Manual

6. Printing Procedures (Basic prints)
SET
5 Press the SET
, "CHANGE : OK" is selected.
, When changing the input signal selected at step 4, press the RIGHT
button to select "CANCEL" . Press the SET
select "INPUT" in "2. SIGNAL SET" again.
SET
6 Press the SET
, The MAIN MENU is displayed.
SET
7 Press the SET
, "SAVE PRG 1/2/3" is selected.
, This menu is used to store the setting in any one of 3 programs
(1, 2 or 3).
8 Press the RIGHT
number 1, 2 or 3 to store the setting.
, The setting will be overlaid. In case of keeping the stored program, do
not select the program No. in which the setting is stored.
SET
9 Press the SET
, The source image (image from the input signal) is displayed.
, The selection of input signal is completed.
30
button .
button.
button.
or LEFT button to select the program
button.
S i g n a l S e t M e n u
SET
button to
M a i n M e n u
M a i n M e n u
C H A N G E : O K
2 . S I G N A L S E T : P U S H [ > ]
S A V E P R G : 1