Backup/Restore - D-Link DVG-5112S User Manual

DVG-5112S User's Manual
Port of Web Access from WAN: HTTP port for WAN. To change this setting, web configuration must
be accessed via the gateway's LAN port. The gateway always uses port 80 for HTTP connection via
the LAN port.
Web UI auto logout: If a user does not act within the effective time range when logging into the web
interface, the user will be disconnected from the web page to allow others to log-in.
NOTE: Due to network security concerns, Web Access for WAN port is disabled by default (port
number "0" in this option means disable web access). To enable it, simply enter a valid port number in
this field.

3-33 Backup/Restore

You can backup settings to a file and restore settings from that file. You also can restore all settings back to
default by selecting Restore Default Configurations and click Restore.
NOTE: the gateway needs for you to Save Settings and Restart so that all settings will be backed up.
Configuration File: Backup all settings.
Configuration Template File: Backup the settings as a template file for editing.
Upload Configuration File: Upload the configuration file from somewhere to the device.
Restore Default Configurations: Reset the device back to the factory default settings.
D-Link Systems, Inc. 45